User Manual

59
ZQ300 Series User Guide
1. Turn the printer OFF.
2. Wait 5 seconds.
3. Turn the printer ON.
Calling Technical Support
If the printer fails to print the conguration label, or you en-
counter problems not covered in the Troubleshooting Guide, con-
tact Zebra Technical Support. Technical Support addresses and
phone numbers for your area can be found on Page 80 of this
manual. You will need to supply the following information:
• Model number and type (e.g. ZQ320)
• Unit serial number (Found on the large label on the back
of the printer, also found in the conguration label printout.
(Refer to Figure 27.)
• Product Conguration Code (PCC) (15 digit number found on
the label on the back of the unit)