User Manual
Table Of Contents
- Proprietary Statements
- Document Conventions
- Introduction to the ZQ300 Series
- Unpacking and Inspection
- Reporting Damage
- Features Overview
- Getting Ready to Print
- Battery
- Installing/Removing Battery & Battery Tape Insulator
- Battery Tape Insulator
- Battery Safety
- Charger Safety
- Designing Labels
- Using Pre-Printed Receipt Media
- Loading the Media
- Media Spacers
- Operator Controls
- Forced Download Description and LED Behavior
- Power Save Mode
- Draft Mode
- Verify the Printer Is Working
- Cable Communication
- Wireless Communications with Bluetooth
- Bluetooth Networking Overview
- NFC Use Cases
- WLAN Overview
- Setting Up the Software
- Wearing the Printer
- Belt Clip
- Adjustable Shoulder Strap
- Soft Case
- Preventive Maintenance
- Extending Battery Life
- General Cleaning Instructions
- ZQ300 Series Cleaning
- Troubleshooting
- Printer Status Indicators
- Troubleshooting Topics
- Troubleshooting Tests
- Printing a Configuration Report
- Communications Diagnostics
- Calling Technical Support
- Specifications
- Printing Specifications
- Memory and Communications Specifications
- Media Specifications
- ZPL Bar Code Specifications and Commands
- CPCL and ZPL Font Specifications
- Printing in Chinese Fonts
- USB Type-C to Type-A Communications Cable
- Physical, Environmental and Electrical Specifications
- ZQ300 Series Accessories
- Appendix A
- Serial Number and PCC Number Locations
- Appendix B
- User Interface LED Charging Behavior
- Appendix C
- Battery Disposal
- Product Disposal
- Appendix D
- Appendix E
- Using Zebra.com
- Product Support Contacts
- Index
34
ZQ300 Series User Guide
Power LED Ring Behavior
The Power Button is surrounded by a three-color (green, am-
ber, red) LED ring. The Power LED Ring will:
• Blink once per 2 seconds green/amber/red during boot-up.
• Display solid green when the printer is fully charged while
On or Off.
• Pulsing green to indicate Sleep Mode and not charging.
• Solid amber to indicate charging while On or Off.
• Pulsing amber to indicate charging while in sleep mode.
• Solid red to indicate an unhealthy charging or charged bat-
tery when not in sleep mode (either On or Off).
• A charge fault will ash red twice per second.
• Pulsing red to indicate unhealthy charging or charged bat-
tery when in sleep mode.
Battery LED Behavior
The Battery icon is backlit by three (3) single color (green) LED
bars, all three of which are turned off when the printer is off.
• 3 bars >= 66% State of Charge (SoC)
(( ))
(
(
(
(
(
(
Blink green/amber/red during boot-up
Power On/Charged Battery
Pulse green Sleep Mode/Not Charging
Power On/Battery Charging
Charging in Sleep Mode
Charging/Charge Complete (Unhealthy)
Charge Fault
(
((
(
(
((
(
Charging/Charge Complete (Unhealthy/Sleep Mode)
(
((
(
(
(