User Manual
Table Of Contents
- Proprietary Statements
- Document Conventions
- Introduction to the ZQ300 Series
- Unpacking and Inspection
- Reporting Damage
- Features Overview
- Getting Ready to Print
- Battery
- Installing/Removing Battery & Battery Tape Insulator
- Battery Tape Insulator
- Battery Safety
- Charger Safety
- Designing Labels
- Using Pre-Printed Receipt Media
- Loading the Media
- Media Spacers
- Operator Controls
- Forced Download Description and LED Behavior
- Power Save Mode
- Draft Mode
- Verify the Printer Is Working
- Cable Communication
- Wireless Communications with Bluetooth
- Bluetooth Networking Overview
- NFC Use Cases
- WLAN Overview
- Setting Up the Software
- Wearing the Printer
- Belt Clip
- Adjustable Shoulder Strap
- Soft Case
- Preventive Maintenance
- Extending Battery Life
- General Cleaning Instructions
- ZQ300 Series Cleaning
- Troubleshooting
- Printer Status Indicators
- Troubleshooting Topics
- Troubleshooting Tests
- Printing a Configuration Report
- Communications Diagnostics
- Calling Technical Support
- Specifications
- Printing Specifications
- Memory and Communications Specifications
- Media Specifications
- ZPL Bar Code Specifications and Commands
- CPCL and ZPL Font Specifications
- Printing in Chinese Fonts
- USB Type-C to Type-A Communications Cable
- Physical, Environmental and Electrical Specifications
- ZQ300 Series Accessories
- Appendix A
- Serial Number and PCC Number Locations
- Appendix B
- User Interface LED Charging Behavior
- Appendix C
- Battery Disposal
- Product Disposal
- Appendix D
- Appendix E
- Using Zebra.com
- Product Support Contacts
- Index
19
ZQ300 Series User Guide
3-Slot Battery Charger (w/ power supply and power cord)
Use Case: Settlement Room
The 3-Slot Battery Charger is a charging system for use with
the 2-cell lithium-ion batteries used in the ZQ300 Series print-
ers. The 3-slot charger is capable of charging three batteries si-
multaneously from empty to full in less than four (4) hours. It can
either be used as a standalone charger or mounted on a 5-Bay
Docking Cradle (see Page 20).
Charging Temperature
Charge batteries in temperatures from 0 °C to 37 °C (32 °F to
98.6 °F). The device or cradle always performs battery charging
in a safe and intelligent manner. At higher temperatures (e.g. ap-
proximately +37 °C (+98 °F)) the device or cradle may for small
periods of time alternately enable and disable battery charging
to keep the battery at acceptable temperatures. The device and
cradle indicates when charging is disabled due to abnormal tem-
peratures via its LED.
Figure 8 • 3-Slot Battery Charger
LED
Indicator
Note • For detailed information on the 1-Slot and 3-Slot
Battery Charger, refer to the P1096070-101 and P1096218-101
Quick Start Guides at https://www.zebra.com/us/en/support-
downloads.html