User Manual

53
ZQ220 User Guide
Label Specications
Parameter ZQ220
Media Width Standard:80 mm +/- 0.75 mm (3.15 in. +/- 0.02 in.)
*Optional: 76.2 mm +/- 0.65 mm (3 in. +/- 0.025 in.)
*Optional: 58 mm +/- 0.65 mm (2.28 in. +/- 0.025 in.)
*Optional: 50.8 mm +/- 0.65 mm (2 in. +/- 0.025 in.)
Min/Max Label
Length
12.5 mm (0.5 in.) minimum (Unconstrained max length in line
print mode)
Black Bar Sensor to
Printhead Burnline
Distance
16 mm (0.63 in.) +/-
0.635 mm (0.025 in.)
Media Thickness
(except Tag)
0.058 to 0.1575 mm (2.28 to 6.2 mils)
Max Tag Thickness 0.1397 mm (5.5 mils)
Max Label Roll
Outer Diameter
50 mm (1.97 in.)
Inner Core
Diameters
Media 3.5 mm or less: 12.7 mm (0.5 in.)
Media > 3.5 mm: 22.2 mm (0.875 in.)
Black Mark Location The reective media black marks should be centered on media
roll
Black Mark
Dimensions
Minimum mark width: 12.7 mm (0.5 in.)
Mark length: 2.4-11 mm (0.09 to 0.43 in.)
Note • Use Zebra brand direct thermal media that is outside wound.
Media may be reective (black mark) sensing, or transmissive (gap)
sensing, die-cut, continuous or linerless. For die-cut labels, use only
full auto dies.
* Optional media requires the use of spacers (KIT-MPV-MD3SPR1-5).
Physical, Environmental and Electrical Specications
Parameter ZQ220
Weight w/ battery 1.0 lbs. (0.45 kg)
Temperature
Operating: -10 °C to 50 °C (14 °F to 122 °F)
Storage: -20 °C to 60 °C
(-4 °F to 140 °F)
Charging: 0 °C to 40°C
(32 °F to 104 °F)
Relative Humidity Operating/Storage: 10% to 90% non-condensing
Battery 2-Cell Battery Lithium-Ion, 7.26 VDC (nominal);
Intrusion
Protection (IP)
Rating
IP43 (without optional environmental case)