User Manual
Table Of Contents
- Proprietary Statements
- Document Conventions
- Introduction to the ZQ220 Printer
- Printer Overview
- Getting Ready to Print
- Battery
- Removing the Battery
- Removing the Battery Tape Insulator
- Installing the Battery
- Battery Safety
- Charger Safety
- Charging the Battery
- AC-to-USB Charger
- Loading Media Procedure
- Operator Controls
- Standard User Controls
- LCD Control Panel
- Information Screen
- Configuration Screen
- Buttons
- Power-Up Sequences
- Verify the Printer is Working
- Printing a Configuration Report
- Connecting the Printer
- Cable Communication
- USB Communications
- Zebra Setup Utilities
- Wireless Communications with Bluetooth
- Bluetooth Networking Overview
- Bluetooth Security Modes
- Bluetooth Minimum Security Modes
- Setting Up the Software
- Designing Labels
- Using Pre-Printed Receipt Media
- Black Mark Dimensions (Receipt Media)
- Label Areas
- Label Design Examples
- Keep-Out Areas
- Near Field Communication (NFC)
- NFC Use Cases
- Wearing the Printer
- Swivel Belt Clip
- Adjustable Shoulder Strap
- Soft Case
- Preventive Maintenance
- Extending Battery Life
- General Cleaning Instructions
- LCD Control Panel Indicators
- Troubleshooting Topics
- Troubleshooting Tests
- Printing a Configuration Label
- Communications Diagnostics
- Specifications
- Appendix A
- Appendix B
- Appendix C
- Appendix D
- Appendix E
- Appendix F
- Appendix G
- Appendix H
10
ZQ220 User Guide
ZQ220 Technology
The ZQ220 printer uses several technologies made popular in other
Zebra Mobile Printer product lines, as well as newer, state-of-the-
art technologies.
Battery
The printer uses a 2-cell Li-Ion battery pack (p/n BTRY-MPV-
24MA1-01) with a charge time of under four (4) hours using a 10W
USB charger or cigarette-to-USB adapter. The battery allows the
printers to print reliably without recharge for three (3) work days
under the following conditions: 25 stops per day and will power up
the device 25 times per day; up to 500 3x8.5 in. receipts per 8-hour
shift with 13% coverage.
Operating Temperature Charging Temperature Storage Temperature
-10˚C to +50˚C
(14˚F to 122˚F)
0˚C to +40˚C
(32˚F to 104˚F)
-20˚C to +60˚C
(-4˚F to 140˚F)
The ZQ220 printer will only function properly with genuine Zebra
battery packs.
Note • Power down the printer before removing the battery to
minimize the risk of corruption.