User Manual

28
ZQ210 User Guide
Buttons
The user has the ability to use the printer’s multi-button interface to
run the following power-up and runtime sequences.
Power-Up Sequences
Seq. # Function Keys Button
1 Two Key Report Hold down Feed button
while pressing and
releasing the Power
Button
2 Forced Download Hold down the
Conguration and Feed
buttons while pressing
Power Button
3 Turn printer On
or O󰀨
Power button
4 Force Hard Reset Hold down Power button
longer than 10 sec.
Verify the Printer is Working
Before you connect the printer to your computer or portable data
terminal, make sure that the printer is in proper working order. You
can do this by printing a conguration label using the “two key”
method. If you can’t get this label to print, refer to “Troubleshooting
Topics” on page 46.
Printing a Conguration Report
1. Turn the printer o󰀨. Load the media compartment with journal
media (media with no black bars or gaps on the back).
2. Press and hold the Feed Button.
3. Press and release the Power button and keep the Feed button
pressed. When printing starts, release the Feed button. The
unit will print a line of interlocking “x” characters to ensure all
elements of the print head are working, print out the version of
software loaded in the printer, and then print the report.