User Manual
Table Of Contents
- Proprietary Statements
- Document Conventions
- Introduction to the ZQ210 Printer
- Printer Overview
- Getting Ready to Print
- Battery
- Removing the Battery
- Installing the Battery
- Battery Safety
- Charger Safety
- Charging the Battery
- AC-to-USB Charger
- AC-to-USB Charger (cont.)
- Loading Media Procedure
- Operator Controls
- Standard User Controls
- LCD Control Panel
- Information Screen
- Configuration Screen
- Buttons
- Power-Up Sequences
- Verify the Printer is Working
- Printing a Configuration Report
- Connecting the Printer
- Communication to the Printer
- USB Communications
- Zebra Setup Utilities
- Wireless Communications with Bluetooth
- Bluetooth Networking Overview
- Bluetooth Security Modes
- Bluetooth Minimum Security Modes
- Setting Up the Software
- Designing Labels
- Using Pre-Printed Receipt Media
- Black Mark Dimensions (Receipt Media)
- Label Areas
- Label Design Examples
- Keep-Out Areas
- Near Field Communication (NFC)
- NFC Use Cases
- Wearing the Printer
- Swivel Belt Clip
- Soft Case
- Preventive Maintenance
- Extending Battery Life
- General Cleaning Instructions
- LCD Control Panel Indicators
- Troubleshooting Topics
- Troubleshooting Tests
- Printing a Configuration Label
- Communications Diagnostics
- Specifications
- Appendix A
- Appendix B
- Appendix C
- Appendix D
- Appendix E
- Appendix F
- Appendix G
- Appendix H
- Index
22
ZQ210 User Guide
Loading Media in the Printer
Loading Media Procedure
Press the Latch Release Lever on the side of the printer as shown
in “1” below. The Media Cover will open automatically.
Rotate the Media Cover back completely as shown in “2”, exposing
the media compartment.
Figure 3 • Opening the Printer
1
Latch
Release Lever
Media
Cover
Media
Compartment
Note • The printers also have the option to use media spacers
(p/n KIT-MPV-MD2SPR1-05), which are placed in the media
compartment and allow the printer to accept 49.5 mm (1.95 in.), 40 mm
(1.57 in.) and 30 mm (1.18 in.) wide paper.