User Manual
Table Of Contents
- Proprietary Statements
- Document Conventions
- Introduction to the ZQ210 Printer
- Printer Overview
- Getting Ready to Print
- Battery
- Removing the Battery
- Installing the Battery
- Battery Safety
- Charger Safety
- Charging the Battery
- AC-to-USB Charger
- AC-to-USB Charger (cont.)
- Loading Media Procedure
- Operator Controls
- Standard User Controls
- LCD Control Panel
- Information Screen
- Configuration Screen
- Buttons
- Power-Up Sequences
- Verify the Printer is Working
- Printing a Configuration Report
- Connecting the Printer
- Communication to the Printer
- USB Communications
- Zebra Setup Utilities
- Wireless Communications with Bluetooth
- Bluetooth Networking Overview
- Bluetooth Security Modes
- Bluetooth Minimum Security Modes
- Setting Up the Software
- Designing Labels
- Using Pre-Printed Receipt Media
- Black Mark Dimensions (Receipt Media)
- Label Areas
- Label Design Examples
- Keep-Out Areas
- Near Field Communication (NFC)
- NFC Use Cases
- Wearing the Printer
- Swivel Belt Clip
- Soft Case
- Preventive Maintenance
- Extending Battery Life
- General Cleaning Instructions
- LCD Control Panel Indicators
- Troubleshooting Topics
- Troubleshooting Tests
- Printing a Configuration Label
- Communications Diagnostics
- Specifications
- Appendix A
- Appendix B
- Appendix C
- Appendix D
- Appendix E
- Appendix F
- Appendix G
- Appendix H
- Index
17
ZQ210 User Guide
Installing the Battery
1. Locate the battery compartment on the bottom of the printer.
2. Plug in the 5-pin connector and insert the battery in the battery
compartment.
3. Insert the battery compartment cover over the battery. Secure
the cover with the screw and a #1 Phillips driver. (If also using a
belt clip, thread the screw through the belt clip and the cover to
secure.)
OR