User guide

41
Getting Started
Defaulting the 10/100 Internal PS
08/27/2007 ZebraNet
®
10/100 Internal Print Server 14197L-002 Rev. A
for ZM400, ZM600, GK420 and GX420/430 User Guide
WebView
To default the 10/100 Internal PS to factory settings using WebView, complete
these steps:
1. From the ZebraNet PrintServer view, click Factory Print Server Settings.
The Restore to Factory Defaults page opens:
Figure 11 • Restore to Factory Defaults
2. Enable the check box for the settings you want to reset, and click Submit Changes.
Important • During the reset cycle, the web pages are unavailable. Upon completion,
check the IP address of the 10/100 Internal PS as it may have changed during the reset
cycle.