Technical information
70 PrintServer II User and Reference Guide
Getting Started
Defaulting the PSII
The Reset Print Server dialog opens:
3 Select the settings you want to reset, then click Restore.
7HVW%XWWRQ
7RGHIDXOWWKH36,,WRIDFWRU\VHWWLQJVXVLQJWKH7HVWEXWWRQ
FRPSOHWHWKHVHVWHSV
1 The printer is turned off (O).
The Test button is a small hole on the PSII device. To press the Test button, you
need to insert something small into the hole, like a paperclip.
2 With the printer turned off, press and hold the Test button on the PSII device and
turn on the printer.
3 The status indicator tells you when PSII has been reset to factory defaults, as
follows:
• If an active network cable is connected to the PSII, the status indicator turns
solid green. When this happens, you can release the Test button.
• If there is not an active network cable connected to the PSII, the status
indicator flashes green. When this happens, you can release the Test button.
• For more details on status indicators, see Status Indicator on page 134.