Technical information

36 PrintServer II User and Reference Guide
Getting Started
Before you begin
%HIRUH\RXEHJLQ
PSII offers many features, but how you access and work with them is dependent on
your environment. Before you begin, you need to get information from the
PSII
configuration label.
7RSULQWD36,,FRQILJXUDWLRQODEHOFRPSOHWHWKHVHVWHSV
1 Turn on the printer and let it complete its power-up cycle.
2 Let the PSII complete its POST cycle.
3 When the above steps are complete, press the Test button and hold it in for a few
seconds before you release it.
!
Important • Make sure the printer is turned off (O).
Note • Running the POST cycle requires you to access the PSII Test button on the
PSII device. On the:
Z4Mplus and Z6Mplus, the Test button on the
PSII device is a little
white button. For more details, see the illustration under the heading
XiII, XiIII, 105SL, and PAX-Series on page 16.
On any other printer, the Test button on the
PSII device is a small hole.
For more details, see the illustration under the heading 
Z4Mplus/Z6Mplus on page 20.