Technical information

140 PrintServer II User and Reference Guide
Frequently Asked Questions
FAQs
What are the minimum
requirements to network a
printer?
Cat-5 network cable with 10BASE-T con-
nectors
PSII
Hub or Switch
If a hub or switch is NOT used, you need a
cross-over cable.
Workstation running a TCP stack with print
services installed
What do the activity lights on the
PSII mean?
Fast blinking (9 times/second) — no link
status
Slow blinking (1 time/second) — no IP
address, or the unit is sending data to the
parallel port
Blinking red — unit is still in POST
red-green-red-green — unit is in Netware
firmware update mode
red-red-green-green — unit is in IP firm-
ware update mode
Solid red — unit has failed POST. Remove
network cable and restart printer
What is the default User ID and
password for the print server?
The User ID is admin and the password is
1234.
4XHVWLRQ $QVZHU