Technical information

Frequently Asked Questions
FAQs
PrintServer II User and Reference Guide 139
Will the ZebraNet PSII allow
connectivity to anything other
than a PC network?
Ye s.
The ZebraNet
PSII allows connectivity to
systems such as IBM’s AS400, provided that
it is configured using TCP/IP. Other network
protocols can be used with third-party
adapters that are converted to 10BASE-T.
Will the ZebraNet
PSII option
work on a 10BASE-T per second
network?
No.
The ZebraNet
PSII option is a 10BASE-T
print server. This means that the data cannot
travel any faster than 10 megabits per second.
The ZebraNet PSII can be deployed on a
network that is utilizing 10/100 hubs, but the
ZebraNet PSII operates at only 10 megabits
per second.
What if a print job makes it to
the queue, but never leaves the
queue? The label does not print.
These are the things to check:
Confirm that the printer is turned on and
receiving power.
Confirm that the network cable is plugged
in and that you can ping the printer.
If the above bullets do not change the
outcome, it is likely that there was a
misconfiguration while creating the queue.
The queue must be recreated verifying the
following:
Confirm that you use the print server’s
valid IP address.
If you are using a UNIX or AS/400
host, there is an option for the remote
queue name. There is only one valid
response to use: PORTLF1.
If Windows does not have LPR
installed, the above required option
should be left blank.
See the documentation for other oper-
ating system specific queue creation.
4XHVWLRQ $QVZHU