Technical information

138 PrintServer II User and Reference Guide
Frequently Asked Questions
FAQs
)$4V
This table provides frequently asked questions (FAQs) on PSII:
4XHVWLRQ $QVZHU
Are there any differences in
functionality between a ZebraNet
PSII with an EPL-based printer
and with a ZebraLink-enabled
ZPL printer?
Ye s.
In a ZebraLink environment, with either a
Web browser or with the ZebraNet View
Utilities, there are a variety of Web pages
that display a wealth of status information
regarding both the ZebraLink printer and
its ZebraNet
PSII. However, when used
with an EPL printer, such as the LP/TLP
2844, the Web pages for printer status are
not available at this time, only the Web
pages showing status of the
PSII are dis-
played. The
PSII can be easily configured.
However, printer configuration information
regarding the EPL printer is not available
via the ZebraNet Utilities.
Error conditions: Using ZebraNet Alert, an
EPL printer can be configured to use differ-
ent IP addresses to report the following
Alert status conditions: on-line, off-line,
paper out.
For EPL: only two destinations can be con-
figured to report error messages (online,
offline, and paper out) using SMTP email
alert – serial and parallel port destinations
are not supported.
Can the internal ZebraNet PSII
option work on a computer
network that is running both
TCP/IP and IPX protocols
simultaneously?
Ye s.
The ZebraNet PSII runs all of its available
protocols simultaneously. This means that the
ZebraNet PSII can run on mixed networks
such as a network using Microsoft, UNIX,
and Novell NetWare operating systems.