Technical information

122 PrintServer II User and Reference Guide
ZebraNet Utilities
ZebraNet Alert
=HEUD1HW$OHUW'HVWLQDWLRQV
Unsolicited Alert messages can be directed to the following destinations:
 Email (PSII-specific)
 Serial (ZebraLink-specific)
 Parallel (ZebraLink-specific)
 TCP (PSII-specific)
 UDP (ZebraLink-specific)
 SNMP (PSII-specific)
=HEUD1HW$OHUW8VLQJ6103
You can send notifications over SNMP only, for use with ZebraNet Alert or a similar
network management utility.
7RFRQILJXUHWKH36,,WRVHQGDOHUWVDFURVVD7&3,31HWZRUN
WR=HEUD1HW$OHUWFRPSOHWHWKHVHVWHSV
1 From the task bar, select Start>Programs>ZebraNet Utilities>ZebraNet View.
2 Select the printer you want.
• If a DHCP server is present, the PSII will already have an IP address.
• If no DHCP server is present, you might need to assign the printer an IP
address.
3 To assign your printer an IP address, from the menu bar, select Print
Server>Configuration
.
4 For PrintServer SNMP Traps, select the SNMP Traps tab.
5 Enter the trap destination and options.
 Label taken
 Head element out
 Power on
Important • If you did not install ZebraNet Alert during the ZebraNet Utilities
installation, see ZebraNet Utilities on page 26.