Technical information
86 PrintServer II User and Reference Guide
PrintServer II
PSII Features
36,,)HDWXUHV
This section covers features available for the PSII only, not the printer’s features. Some
of the features you access in this section prompt you to enter the default user ID and
password, as follows:
• User ID: admin
• Password: 1234
The options on the Print Server page vary. ZPL and EPL printers print server settings
vary slightly.
6WDWXVDQG&RQILJXUDWLRQ
The steps that follow are based on the navigation of a ZPL printer using firmware X.10
or higher.
7RDFFHVVWKHSULQWVHUYHUVHWWLQJVFRPSOHWHWKHVHVWHSV
1 Open a Web browser.
2 In the Address text-box, type your printer’s IP address, and press Enter.
Note • The difference between ZPL and EPL is this:
ZPL — If you have a ZPL printer, you are initially prompted to the Printer
Home page, and from there, you select Print Server Settings.
EPL — If you have an EPL printer, you are immediately prompted to the Print
Server page.
!
Important • You can upgrade your firmware by visiting our Web site:
http://www.zebra.com