User's Manual
Table Of Contents
- Contents
- About This Document
- Introduction
- Commands
- Immediate Commands
- Print Commands
- Advanced Mode, Select
- Alphanumeric Field Separator
- Batch Count, Set
- Clear All Data
- Clear Data From Current Field
- Command Terminator 1
- Command Terminator 2
- Configuration Parameters, Transmit
- Cut
- Data Shift – International Characters
- Direct Graphics Mode, Select
- Emulation Mode, Enter
- Field, Select
- Field Decrement, Set
- Field Increment, Set
- First Data Entry Field, Select
- Font, Transmit
- Form Feed
- Format, Select
- Format, Transmit
- Increment and Decrement, Disable
- Memory Usage, Transmit
- Next Data Entry Field, Select
- Numeric Field Separator
- Options Selected, Transmit
- Page, Select
- Page, Transmit
- Printhead Parameters, Transmit
- Program Mode, Enter
- Program Number, Transmit
- Quantity Count, Set
- Start and Stop Codes (Code 39), Print
- Test and Service Mode, Enter
- User-Defined Characters, Transmit
- User-Defined Tables, Transmit
- Warm Boot
- Configuration Commands
- Amount of Storage, Define
- Auto-Transmit 1, Enable
- Auto-Transmit 2, Enable
- Auto-Transmit 3, Enable
- Auto-Transmit 1, 2, and 3, Disable
- Cutter, Enable or Disable
- Dark Adjust, Set
- Emulation or Advanced Mode on Power-Up
- End-of-Print Skip Distance, Set
- IBM Language Translation, Enable or Disable
- Intercharacter Delay, Set
- Label Rest Point, Adjust
- Label Retract, Enable or Disable
- Label Retract Distance, Set
- Label Stock Type, Select
- Label Width, Set
- Maximum Label Length, Set
- Media Sensitivity, Select
- Message Delay, Set
- Number of Image Bands, Set
- Postamble, Set
- Preamble, Set
- Print Speed, Set
- Printer Language, Select
- Printhead Loading Mode, Select
- Self-Strip, Enable or Disable
- Top of Form, Set
- Program Mode Commands
- Bar Code, Select Type
- Code 39
- Code 93
- Interleaved 2 of 5
- Code 2 of 5
- Codabar
- Code 11
- Code 128
- UPC/EAN
- HIBC Code 39
- Code 16K
- Code 49
- POSTNET
- PDF417
- Using ,m1 to Select the Number of Columns
- Using ,m2 to Select an Error Correction Level
- Using ,m3 to Set the Truncate Flag
- MaxiCode
- JIS-ITF
- HIBC Code 128
- Data Matrix Symbology Versions ECC-100 and ECC-200
- QR Code
- MicroPDF417
- Bar Code Field, Create or Edit
- Bitmap Cell Height for Graphic or UDF, Define
- Bitmap Cell Width for Graphic or UDF, Define
- Bitmap User-Defined Font, Clear or Define
- Border Around Human-Readable Text, Define
- Box Field, Create or Edit
- Character Bitmap Origin Offset, Define
- Character Rotation or Bar Code Ratio, Define
- Code 39 Prefix Character, Define
- Command Tables, Load
- Current Edit Session, Save
- Data Source for Format in a Page, Define
- Field, Delete
- Field Data, Define Source
- Field Direction, Define
- Field Origin, Define
- Font Character Width, Define
- Font Type, Select
- Format, Create or Edit
- Format Direction in a Page, Define
- Format, Erase
- Format Offset Within a Page, Define
- Format Position From Page, Delete
- Format Position in a Page, Assign
- Graphic, Select
- Graphic or UDC, Define
- Height Magnification of Bar, Box, or UDC, Define
- Human-Readable Field, Create or Edit
- Intercharacter Space for UDF, Define
- Interpretive Field, Edit
- Interpretive Field, Enable or Disable
- Length of Line or Box Field, Define
- Line Field, Create or Edit
- Outline Font, Clear or Create
- Outline Font, Download
- Page, Create or Edit
- Page, Delete
- Pitch Size, Set
- Point Size, Set
- Print Line Dot Count Limit, Set
- Program Mode, Exit
- User-Defined Character, Clear or Create
- User-Defined Character Field, Create or Edit
- User-Defined Font Character, Create
- Width of Line, Box, Bar, or Character, Define
- Test and Service Commands
- Ambient Temperature, Transmit
- Command Terminator
- Dark Adjust
- Factory Defaults, Reset
- Formats, Print
- Hardware Configuration Label, Print
- Label Taken Sensor Value, Transmit
- Pages, Print
- Pitch Label, Print
- Print Quality Label, Print
- Printhead Temperature Sensor Value, Transmit
- Reflective Sensor Value, Transmit
- Software Configuration Label, Print
- Test and Service Mode, Exit
- Transmissive Sensor Value, Transmit
- User-Defined Characters (UDC) and Graphics, Print
- User-Defined Fonts, Print
- Set-Get-Do (SGD) Commands
- Network Configuration
- Control Panel Options
- Index
Commands
Print Commands
24
14177L-003 APL-I Reference Guide 11/24/09
Configuration Parameters, Transmit
Purpose To send the present printer configuration commands to the host.
Syntax
<ESC>p
Partially Supported Based on testing, this command is partially supported on the Zebra
printer with APL-I firmware with the following differences and outputs:
• Parameters not supported: Security level, audible alarm, power up mode, top
position, printhead pressure, number of image bands, amount of storage, online power
up test parameters, and printhead test are not supported by the printer. The values
transmitted for them are static default values.
Cut
Purpose To move the label to the cutter and cut.
Syntax
<SO>
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes To run the Cut command, the cutter device must be present and not yet enabled. Send
this command after printing stops.
Data Shift – International Characters
Purpose To enter certain command characters in a data field.
Syntax
<SUB> or <DLE>
Supported Based on testing, this command works the same on the Zebra printer with
APL-I firmware as on the 3400D printer.
Notes This command enables you to use command characters as data characters in
Advanced and Emulation modes. It shifts the next character into the upper data bank. As a
result, to print international characters, the eighth bit is set to 1.