User's Manual
Table Of Contents
- Contents
- About This Document
- Introduction
- Commands
- Immediate Commands
- Print Commands
- Advanced Mode, Select
- Alphanumeric Field Separator
- Batch Count, Set
- Clear All Data
- Clear Data From Current Field
- Command Terminator 1
- Command Terminator 2
- Configuration Parameters, Transmit
- Cut
- Data Shift – International Characters
- Direct Graphics Mode, Select
- Emulation Mode, Enter
- Field, Select
- Field Decrement, Set
- Field Increment, Set
- First Data Entry Field, Select
- Font, Transmit
- Form Feed
- Format, Select
- Format, Transmit
- Increment and Decrement, Disable
- Memory Usage, Transmit
- Next Data Entry Field, Select
- Numeric Field Separator
- Options Selected, Transmit
- Page, Select
- Page, Transmit
- Printhead Parameters, Transmit
- Program Mode, Enter
- Program Number, Transmit
- Quantity Count, Set
- Start and Stop Codes (Code 39), Print
- Test and Service Mode, Enter
- User-Defined Characters, Transmit
- User-Defined Tables, Transmit
- Warm Boot
- Configuration Commands
- Amount of Storage, Define
- Auto-Transmit 1, Enable
- Auto-Transmit 2, Enable
- Auto-Transmit 3, Enable
- Auto-Transmit 1, 2, and 3, Disable
- Cutter, Enable or Disable
- Dark Adjust, Set
- Emulation or Advanced Mode on Power-Up
- End-of-Print Skip Distance, Set
- IBM Language Translation, Enable or Disable
- Intercharacter Delay, Set
- Label Rest Point, Adjust
- Label Retract, Enable or Disable
- Label Retract Distance, Set
- Label Stock Type, Select
- Label Width, Set
- Maximum Label Length, Set
- Media Sensitivity, Select
- Message Delay, Set
- Number of Image Bands, Set
- Postamble, Set
- Preamble, Set
- Print Speed, Set
- Printer Language, Select
- Printhead Loading Mode, Select
- Self-Strip, Enable or Disable
- Top of Form, Set
- Program Mode Commands
- Bar Code, Select Type
- Code 39
- Code 93
- Interleaved 2 of 5
- Code 2 of 5
- Codabar
- Code 11
- Code 128
- UPC/EAN
- HIBC Code 39
- Code 16K
- Code 49
- POSTNET
- PDF417
- Using ,m1 to Select the Number of Columns
- Using ,m2 to Select an Error Correction Level
- Using ,m3 to Set the Truncate Flag
- MaxiCode
- JIS-ITF
- HIBC Code 128
- Data Matrix Symbology Versions ECC-100 and ECC-200
- QR Code
- MicroPDF417
- Bar Code Field, Create or Edit
- Bitmap Cell Height for Graphic or UDF, Define
- Bitmap Cell Width for Graphic or UDF, Define
- Bitmap User-Defined Font, Clear or Define
- Border Around Human-Readable Text, Define
- Box Field, Create or Edit
- Character Bitmap Origin Offset, Define
- Character Rotation or Bar Code Ratio, Define
- Code 39 Prefix Character, Define
- Command Tables, Load
- Current Edit Session, Save
- Data Source for Format in a Page, Define
- Field, Delete
- Field Data, Define Source
- Field Direction, Define
- Field Origin, Define
- Font Character Width, Define
- Font Type, Select
- Format, Create or Edit
- Format Direction in a Page, Define
- Format, Erase
- Format Offset Within a Page, Define
- Format Position From Page, Delete
- Format Position in a Page, Assign
- Graphic, Select
- Graphic or UDC, Define
- Height Magnification of Bar, Box, or UDC, Define
- Human-Readable Field, Create or Edit
- Intercharacter Space for UDF, Define
- Interpretive Field, Edit
- Interpretive Field, Enable or Disable
- Length of Line or Box Field, Define
- Line Field, Create or Edit
- Outline Font, Clear or Create
- Outline Font, Download
- Page, Create or Edit
- Page, Delete
- Pitch Size, Set
- Point Size, Set
- Print Line Dot Count Limit, Set
- Program Mode, Exit
- User-Defined Character, Clear or Create
- User-Defined Character Field, Create or Edit
- User-Defined Font Character, Create
- Width of Line, Box, Bar, or Character, Define
- Test and Service Commands
- Ambient Temperature, Transmit
- Command Terminator
- Dark Adjust
- Factory Defaults, Reset
- Formats, Print
- Hardware Configuration Label, Print
- Label Taken Sensor Value, Transmit
- Pages, Print
- Pitch Label, Print
- Print Quality Label, Print
- Printhead Temperature Sensor Value, Transmit
- Reflective Sensor Value, Transmit
- Software Configuration Label, Print
- Test and Service Mode, Exit
- Transmissive Sensor Value, Transmit
- User-Defined Characters (UDC) and Graphics, Print
- User-Defined Fonts, Print
- Set-Get-Do (SGD) Commands
- Network Configuration
- Control Panel Options
- Index
Control Panel Options
S4M LCD Options
106
14177L-003 APL-I Reference Guide 11/24/09
S4M LCD Options
S4M Control Panel Navigation
How you navigate through the S4M menu impacts if you come to the top of a protected menu
or the bottom of a protected menu. For an example of how the LCD menu navigation works,
see the table that follows:
S4M Password Protected Menus
Some of the LCD options are password protected. As you navigate through the printer menu, if
you come to an
ADVANCED SETUP menu option, then you have come to password protected
menu. These LCD menu options appear when you are about to enter a protected menu:
•
ADVANCED SETUP 3 — for menu details, see S4M Protected Menu on page 109.
•
ADVANCED SETUP 4 — for menu details, see the Maintenance Manual.
If you navigate… Then…
Using the right arrow key When you come to a protected menu, for example
ADVANCED SETUP 3, a password needs to be
entered. When you access the protected menu, the
menu is listed from the top of the menu to the
bottom of the menu. For menu details, see Table 5,
S4M Protected Menu on page 109.
Using the left arrow key When you come to a protected menu, for example
ADVANCED SETUP 3, a password needs to be
entered. When you access the protected menu, the
menu is listed from the bottom of the menu to the
top of the menu. For menu details, see Table 5, S4M
Protected Menu on page 109.
Example • This example provides you with a scenario using the right arrow key and a
scenario using the left arrow key and how they differ, as follows:
Scenario One -Using the right arrow key to navigate
You use the right arrow key to move through the menu for your S4M printer. You come
to
ADVANCED SETUP 3. You enter the password to access the menu. You come to the
first menu item in
ADVANCED SETUP 3, which is PRINT OUT.
Scenario Two -Using the left arrow key to navigate
You use the left arrow key to move through the menu for your S4M printer. You come to
ADVANCED SETUP 3. You enter the password to access the menu. You come to the
last menu item in
ADVANCED SETUP 3, which is LANGUAGE.