User Manual
Table Of Contents
- Terms of Use
- Publication Date
- About
- Contents
- Introduction
- Printer Features
- Printer Features
- Inside the ZD620 Dual Capacity Ribbon Roll Printer
- Inside the ZD620 and ZD420 Direct Thermal Printers
- Inside the ZD420 Ribbon Cartridge Printer
- Label Dispenser Option (field installable) - All Models
- Cutter Option (field installable) - All Models
- Linerless Media Tear-Off Option (Direct Thermal Models Only)
- Linerless Cutter Option (Direct Thermal Models Only)
- Identifying Platen Drive Rollers Types
- Printer Power Supply Options
- ZD620 Locking Printer Features
- Zebra Print Touch
- Printer Features
- Install Hardware Options
- Field Installable printer Accessories and Options
- Printer Connectivity Modules
- Media Handling Options
- Removing the Standard Bezel
- Installing the Label Dispenser
- Installing the Standard Media Cutter
- Installing the Linerless Media Cutter
- Installing the Linerless Media ‘Tear-Off’ Bezel
- Media Roll Core Size Adapters
- Print Resolution Upgrade Kits
- Installing the Attached Power Supply Base Options
- Installing the Attached Battery Base Options
- Installing the Battery into the Attached Power Base
- User Interface
- LCD User Interface
- Meaning of the Indicator Light Patterns
- Display Controls and Menus
- Battery Indicators and Controls
- Printer Configuration Menus
- Setup
- Printer Setup Overview
- Select a Location for the Printer
- Install Printer Options and Connectivity Modules
- Attaching Power
- Getting Ready to Print
- Loading Roll Media
- Loading Thermal Transfer Roll Ribbon
- Loading the ZD420 Ribbon Cartridge
- Run a SmartCal Media Calibration
- Test Printing with the Configuration Report
- Detecting a Media Out Condition
- Detecting a Ribbon Out Condition
- Connecting your Printer to a Computer
- Wi-Fi and Bluetooth Classic Wireless Connectivity Option
- Setup for Windows® OS
- Print Operations
- Thermal Printing
- Select a Print Mode
- Adjusting the Print Quality
- Darkness Control
- Adjusting the Print Width
- Printing on Fan-Fold Media
- Printing with Externally Mounted Roll Media
- Using the Label Dispenser Option
- Using the Linerless Options
- Sending Files to the Printer
- Ribbon Cartridge Programming Commands
- Printing with the Attached Battery Base and Battery Option
- Printer Fonts
- EPL Line Mode - Direct Thermal Printers only
- ZD620 and ZD420 Locking Printer Option
- Zebra® ZKDU — Printer Accessory
- ZBI 2.0™ — Zebra Basic Interpreter
- Setting the Power Failure Recovery Mode Jumper
- USB Host Port and Link-OS Usage Examples
- USB Host
- USB Host and Printer Usage Examples
- Items Required for the USB Host Exercises
- Files for Completing the Exercises
- Exercise 1: Copy Files to a USB Flash Drive and Perform USB Mirror
- Exercise 2: Print a Label Format from a USB Flash Drive
- Exercise 3: Copy Files to/from a USB Flash Drive
- Exercise 4: Enter Data for a Stored File with a USB Keyboard and Print a Label
- Using the USB Hosts Port and the NFC Capabilities
- Maintenance
- Troubleshooting
- Tools
- Printer Diagnostics
- Power-On Self Test
- SmartCal Media Calibration
- Configuration Report (CANCEL Self Test)
- Printer Network (and Bluetooth) Configuration Report
- Print Quality Report (FEED self test)
- Reset Printer Factory Defaults (PAUSE + FEED Self Test)
- Reset Network Factory Defaults (PAUSE + CANCEL Self Test)
- Reset Button
- Communication Diagnostics Test
- Sensor Profile
- Advanced Mode
- Factory Test Modes
- Universal Serial Bus (USB) Interface
- Serial Port Interface
- ZD620 / ZD420 Thermal Transfer Models
- ZD620 / ZD420 Ribbon Cartridge Thermal Transfer Models
- ZD620 / ZD420 Direct Thermal Models
- Printer Diagnostics
- Media
- ZPL Configuration
Printer Configuration Menus
69
User Menus
The user menus break the printer configuration into several task based menus. Click any menu item to go
to its description in the table. For navigation instructions, see Navigating through Menu Display Screens.
SETTINGS TOOLS NETWORK BATTERY
• DARKNESS
• PRINT SPEED
• MEDIA TYPE
• PRINT METHOD
• TEAR OFF
• PRINT WIDTH
• PRINT MODE
• LABEL TOP
• LEFT POSITION
• REPRINT MODE
• LABEL LENGTH
MAX
• LANGUAGE**
•TOOLS MENU*
• PRINT
INFORMATION**
• IDLE DISPLAY
• POWER UP
ACTION
• HEAD CLOSE
ACTION
• LOAD DEFAULTS
• MEDIA/RIBBON
CAL**
• DIAGNOSTIC
MODE
• CONFIG INFO TO
USB
• ZBI ENABLED?
• RUN ZBI
PROGRAM
• STOP ZBI
PROGRAM
• PRINT USB FILE
• COPY USB FILE TO
E:
• STORE E: FILE TO
USB
• PRINT STATION
• PASSWORD
PROTECT
• PRINT TEST
FORMAT
• NETWORK MENU*
• ACTIVE PRINT
SERVER
• PRIMARY
NETWORK
• WIRED IP
ADDRESS
• WIRED SUBNET
MASK
• WIRED GATEWAY
• WIRED IP
PROTOCOL
• WIRED MAC
ADDRESS
• WLAN IP ADDRESS
• WLAN SUBNET
MASK
• WLAN GATEWAY
• WLAN IP
PROTOCOL
• WLAN MAC
ADDRESS
• ESSID
• CHANNEL
• SIGNAL
• IP PORT
• IP ALTERNATE
PORT
• PRINT
INFORMATION**
• RESET NETWORK
• VISIBILITY AGENT
•BATTERY MENU
• BATTERY STATUS
• LANGUAGE MENU*
LANGUAGE SENSORS PORTS BLUETOOTH
• LANGUAGE**
• COMMAND
LANGUAGE
• COMMAND CHAR
• CONTROL CHAR
• DELIMITER CHAR
• ZPL MODE
• VIRTUAL DEVICE
• SENSORS MENU*
• SENSOR TYPE
• MEDIA/RIBBON
CAL**
• PRINT
INFORMATION**
• LABEL SENSOR
• TAKE LABEL
•PORTS MENU*
• BAUD RATE
• DATA BITS
• PARITY
• HOST HANDSHAKE
• WML
•BLUETOOTH
MENU*
• BLUETOOTH
ADDRESS
• MODE
• DISCOVERY
• CONNECTED
• BT SPEC VERSION
• MIN SECURITY
MODE
• SETTINGS MENU*
* Denotes a shortcut to the next user menu.
** Appears in multiple user menus for your convenience.