User Manual
Table Of Contents
- Terms of Use
- Publication Date
- About
- Contents
- Introduction
- Printer Features
- Printer Features
- Inside the ZD620 Dual Capacity Ribbon Roll Printer
- Inside the ZD620 and ZD420 Direct Thermal Printers
- Inside the ZD420 Ribbon Cartridge Printer
- Label Dispenser Option (field installable) - All Models
- Cutter Option (field installable) - All Models
- Linerless Media Tear-Off Option (Direct Thermal Models Only)
- Linerless Cutter Option (Direct Thermal Models Only)
- Identifying Platen Drive Rollers Types
- Printer Power Supply Options
- ZD620 Locking Printer Features
- Zebra Print Touch
- Printer Features
- Install Hardware Options
- Field Installable printer Accessories and Options
- Printer Connectivity Modules
- Media Handling Options
- Removing the Standard Bezel
- Installing the Label Dispenser
- Installing the Standard Media Cutter
- Installing the Linerless Media Cutter
- Installing the Linerless Media ‘Tear-Off’ Bezel
- Media Roll Core Size Adapters
- Print Resolution Upgrade Kits
- Installing the Attached Power Supply Base Options
- Installing the Attached Battery Base Options
- Installing the Battery into the Attached Power Base
- User Interface
- LCD User Interface
- Meaning of the Indicator Light Patterns
- Display Controls and Menus
- Battery Indicators and Controls
- Printer Configuration Menus
- Setup
- Printer Setup Overview
- Select a Location for the Printer
- Install Printer Options and Connectivity Modules
- Attaching Power
- Getting Ready to Print
- Loading Roll Media
- Loading Thermal Transfer Roll Ribbon
- Loading the ZD420 Ribbon Cartridge
- Run a SmartCal Media Calibration
- Test Printing with the Configuration Report
- Detecting a Media Out Condition
- Detecting a Ribbon Out Condition
- Connecting your Printer to a Computer
- Wi-Fi and Bluetooth Classic Wireless Connectivity Option
- Setup for Windows® OS
- Print Operations
- Thermal Printing
- Select a Print Mode
- Adjusting the Print Quality
- Darkness Control
- Adjusting the Print Width
- Printing on Fan-Fold Media
- Printing with Externally Mounted Roll Media
- Using the Label Dispenser Option
- Using the Linerless Options
- Sending Files to the Printer
- Ribbon Cartridge Programming Commands
- Printing with the Attached Battery Base and Battery Option
- Printer Fonts
- EPL Line Mode - Direct Thermal Printers only
- ZD620 and ZD420 Locking Printer Option
- Zebra® ZKDU — Printer Accessory
- ZBI 2.0™ — Zebra Basic Interpreter
- Setting the Power Failure Recovery Mode Jumper
- USB Host Port and Link-OS Usage Examples
- USB Host
- USB Host and Printer Usage Examples
- Items Required for the USB Host Exercises
- Files for Completing the Exercises
- Exercise 1: Copy Files to a USB Flash Drive and Perform USB Mirror
- Exercise 2: Print a Label Format from a USB Flash Drive
- Exercise 3: Copy Files to/from a USB Flash Drive
- Exercise 4: Enter Data for a Stored File with a USB Keyboard and Print a Label
- Using the USB Hosts Port and the NFC Capabilities
- Maintenance
- Troubleshooting
- Tools
- Printer Diagnostics
- Power-On Self Test
- SmartCal Media Calibration
- Configuration Report (CANCEL Self Test)
- Printer Network (and Bluetooth) Configuration Report
- Print Quality Report (FEED self test)
- Reset Printer Factory Defaults (PAUSE + FEED Self Test)
- Reset Network Factory Defaults (PAUSE + CANCEL Self Test)
- Reset Button
- Communication Diagnostics Test
- Sensor Profile
- Advanced Mode
- Factory Test Modes
- Universal Serial Bus (USB) Interface
- Serial Port Interface
- ZD620 / ZD420 Thermal Transfer Models
- ZD620 / ZD420 Ribbon Cartridge Thermal Transfer Models
- ZD620 / ZD420 Direct Thermal Models
- Printer Diagnostics
- Media
- ZPL Configuration
ZPL Configuration
311
The configuration settings listed here resume after the TAKE LABEL sensor value. These listings contain
printer features seldom changed from default or provide status information.
The printer has the ability to set a command or a group of commands once for all receipts (or labels) that
follow. Those settings will remain in effect until they are changed by subsequent commands, the printer is
reset, or you restore factory defaults.
Table 4 ZPL Commands and Configuration Receipt Callout Cross-Reference
Command Listing Name Description
^MP
MODES ENABLED Default: CWF (See ^MP Command)
MODES DISABLED Default: (nothing set)
^JM
RESOLUTION Default: 448 8/mm (203 dpi); 640 8/mm (300 dpi)
—
FIRMWARE Lists ZPL Firmware Version
—
XML SCHEMA 1.3
—
HARDWARE ID Lists Firmware Boot-block Version
LINK-OS VERSION
—
CONFIGURATION CUSTOMIZED (after first use)
—
RAM 2104k........ R:
—
ONBOARD FLASH 6144k.........E:
^MU
FORMAT CONVERT NONE
RTC DATE Date Displayed
RTC TIME Time Displayed
^JI / ~JI
ZBI DISABLED (Requires key to enable)
—
ZBI VERSION 2.1 (Displayed if installed)
—
ZBI STATUS READY
^JH
^MA
~RO
LAST CLEANED X,XXX IN
HEAD USAGE X,XXX IN
TOTAL USAGE X,XXX IN
RESET CNTR1 X,XXX IN
RESET CNTR2 X,XXX IN
NONRESET CNTR0 (1, 2) X,XXX IN
RESET CNTR1 X,XXX IN
RESET CNTR2 X,XXX IN
SLOT1 EMPTY / SERIAL / WIRED
MASS STORAGE COUNT 0
HID COUNT 0
USB HOST LOCK OUT OFF /ON
— SERIAL NUMBER XXXXXXXXXXX
^JH
EARLY WARNING MAINT. OFF