User Manual

Setup for Windows
®
OS
164
Connecting to a Windows XP
®
SP2 Central Device
This process covers the printer installation for Windows XP SP2 (or above)
1. From the Windows ‘Start’ menu, open the ‘Printers and Faxes’ window. Click on ‘Add Printer’ and a
wizard will start. Click ‘Next’ when the “Welcome” window displays to continue.
2. Leave the ‘Local’ radio button with the ‘Automatic detect ...’ checkbox (checked) selected and click
‘Next’.
3. No printer should be found. If there is one or more new printers detected, then do not select any of
those printers and click ‘Next’.
4. Select the ‘Create a new port’ radio button and select ‘Bluetooth Printer Port’ from the associated pull
down menu.
5. From the new ‘Bluetooth Printer Port’ window, select your printer from the Bluetooth devices in the list.
This may take several minutes. Click on the ‘Connect’ button.
6. The ‘Install Printer Software’ window will open. Select ‘ZDesigner’ as ‘Manufacture’ to select supported
Zebra printer models, and then select your printer model in the ‘Printers’ selection. Click ‘Next’ to
continue.
7. Select ‘Keep the existing drivers’ and click ‘Next’.
8. Name your printer and choose your default printer setting as desired. Click ‘Next’.
9. Answer ‘Yes’, you want to print a test page. Click ‘Next’ to continue.
10.Click ‘Finish’ on the ‘Completing the Add Printer Wizard’ window and the Bluetooth printer will complete
installation and print a Windows test print page (a Windows logo at minimum).