Quick Start Guide

ManualsBrandsZebra ManualsHardwareZD421d label printer - B/W - direct thermal

Open the printer and remove the packing.Slide the release latches to the front to unlock the cover.

Unroll and discard the outer layer of the media roll.

Press the media under the guides.

Spread the roll holders open and place the roll into the printer. Pull the end of the roll past the front edge of the printer.Verify the roll spins easily on the holder.

Align the sensor to the center of the roll for regular labels. Align the sensor to the edge of the roll for marked labels.

ZD421D

Desktop Printer

Quick Start Guide

212396-002

1 Setup

2 Remove Packing

3 Load Media

3 Load Media (continued) 4 Adjust Sensor

Scan the code to download and install Zebra Setup Utilities.

Zebra Technologies | 3 Overlook Point | Lincolnshire, IL 60069 USA — zebra.com

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered

in many jurisdictions worldwide. All other trademarks are the property of their respective own-

50%

PAP

zebra.com/setup

Summary of content (2 pages)

PAGE 1
ZD421D 1 2 Setup Remove Packing Desktop Printer zebra.com/setup Quick Start Guide 3 Slide the release latches to the front to unlock the cover. Open the printer and remove the packing. Verify the roll spins easily on the holder. Pull the end of the roll past the front edge of the printer. Load Media Unroll and discard the outer layer of the media roll. 3 Scan the code to download and install Zebra Setup Utilities.
PAGE 2
5 6 Close Printer Push down on the front edge of the printer until it locks. 8 A. Plug the power supply into the printer. B. Plug the power cable into the power supply. Press the Power button. When the the printer is ready, the printer status light will turn green. Support and Information Need to manage your printer? zebra.com/ppme Need to secure your printer? zebra.com/printsecure C. Plug the power cord into an appropriate receptacle. D. The power supply lights green.