User Manual

Introduction
19
Open the Printer
1. To access the media compartment, pull the release latches towards you and lift the cover.
2. Check the media compartment for loose or damaged components.
CAUTION—ESD: Observe proper electrostatic safety precautions when handling static-sensitive
components such as circuit boards and printheads.The discharge of electrostatic energy that accumulates
on the surface of the human body or other surfaces can damage or destroy the printhead and other
electronic components used in this device. You must observe static-safe procedures when working with
the printhead or the electronic components under the top cover.
Close the printer
1. Lower the top cover.
2. Push down on the front of the printer to close.
3. Push the center or both corners of the printer firmly until both side latches lock.