User Manual

58
Controls and Indicators
Standard Interface Controls
1 • Power Button — Turns power ON and OFF in the printer. It is also used to initiate
low-power sleep and wake states.
• Initial Power ON — Press the Power button until the printer’s indicator
lights flash on. The indicator lights will flash on and off in various
combinations while the printer does self diagnostics, configuration checks,
and integrate optional components which will take several seconds to
complete.
The Status indicator will turn solid GREEN indicating the printer is ready for
normal print operations.
• Sleep Mode — Pressing and releasing the button once will cause the
printer to enter Sleep Mode. The printer will turn off after storing various
configuration and status information in memory. All the indicators will be off
except the Status Indicator will slowly change between On and Off to indicate
Sleep Mode.
• Power OFF with Sleep Mode Delayed — Press and Hold the button for 4-
9 seconds. The operator can start a batch print job and put the printer into the
low power consumption state of Sleep mode — after the job has finished.
• Power OFF / Shutdown — Press and Hold the button for 4-9 seconds.
The printer will turn OFF.
• Power Failure Recovery Mode — This printer feature is activated by a
hardware jumper setting on one of the optional Printer Connectivity Modules
installed in the printer. See Setting the Power Failure Recovery Mode Jumper.
• The printer will automatically Power ON when plugged into an active (ON)
AC power source.
• Supports Sleep Mode and Power OFF with Sleep mode Delayed.
9
8
7
42 653
1