User Manual
Table Of Contents
- Terms of Use
- Publication Date
- About
- Contents
- Introduction
- Printer Features
- Controls and Indicators
- Setup
- Printer Setup Overview
- Select a Location for the Printer
- Attaching Power
- Getting Ready to Print
- Loading Roll Media
- Run a SmartCal Media Calibration
- Test Printing with the Configuration Report
- Detecting a Media Out Condition
- Connecting your Printer to a Computer
- Wi-Fi and Bluetooth Classic Wireless Connectivity Option
- Setup for Windows® OS
- Print Operations
- Maintenance
- Troubleshooting
- Interface Connector Wiring
- Dimensions
- Media
- ZPL Configuration
Print Operations
61
Adjusting the Print Width
Print width must be set:
• Before you use the printer for the first time.
• Any time you change the width of the media in use.
Print width may be set by:
• The Windows printer driver or application software such as ZebraDesigner ™ .
• Controlling printer operations with ZPL programming; refer to the Print Width (
^PW) command
(consult your ZPL Programming Guide).
Replacing Supplies while Using the Printer
If media (labels, receipts, tags, tickets, etc.) run out while printing, leave the printer power on while
reloading (data loss results if you turn off the printer). After you load a new roll of media, press the FEED
button to restart.