User Manual
Table Of Contents
- Terms of Use
- Publication Date
- About
- Contents
- Introduction
- Printer Features
- Controls and Indicators
- Setup
- Printer Setup Overview
- Select a Location for the Printer
- Attaching Power
- Getting Ready to Print
- Loading Roll Media
- Run a SmartCal Media Calibration
- Test Printing with the Configuration Report
- Detecting a Media Out Condition
- Connecting your Printer to a Computer
- Wi-Fi and Bluetooth Classic Wireless Connectivity Option
- Setup for Windows® OS
- Print Operations
- Maintenance
- Troubleshooting
- Interface Connector Wiring
- Dimensions
- Media
- ZPL Configuration
Setup for Windows
®
OS
51
3. Hover over the Bluetooth icon with the mouse pointer and the icon will highlight. Right-Click on the
high-lighted Bluetooth icon. Select ‘Bluetooth Settings’ from the pop-up menu. Verify that both of the
Connections check boxes are checked. Verify that the ‘Turn off the Bluetooth adapter’ is not checked.
Click the ‘Apply’ button. Click the ‘OK’ button to close the window.
4. Click on the ‘Add a device’ in the top bar of the “Devices and Printers’ window. The “Add a device’
windows will populate with Bluetooth devices near you.
5. Turn the Bluetooth 4.0 (3.0 compatible) enabled Zebra printer on. After a few moments the “Add a
device’ windows will add your new printer. Click on the printer icon. Right-Click and select ‘Add device’.