User Manual

Table Of Contents

Controls and Indicators

User Interface Controls

1. Power Button — Turns power ON and OFF in the printer.

•

Power ON — Press the Power button once for less than two (2) seconds and the printer turns on.

The STATUS Indicator light will turn on Amber while the printer does self diagnostics, configuration

checks, and integrate optional components which will take several seconds to complete.

The Status Indicator will turn solid GREEN (or Flashing Green) indicating the printer is ready for

normal print operations.

•

Power OFF / Shutdown — Press and Hold the button for 4-9 seconds. The printer will turn

OFF.

2. STATUS Indicator — The STATUS Indicator for provides the operator basic printer health and

operational status. This indicator is also serves as a power indicator. These are STATUS Indicator light

behaviors for normal printer operation.

• Green — Printer Ready for print and data activity.

• Flashing Green — Normal Operation. Printer may be communicating or processing data.

• Double Flashing Green (2 short flashes of green followed by a long green) — Printer is Paused.

• Flashing Red — Media Alert. The printer is out of media (paper, labels, tags, etc.), media sensing

failure, printer is open, or a cut error.

• Flashing Amber — Over Temp. The printhead is over temperature and must cool to resume

printing.

• Flashing Red, Red, Green — Critical Over Temp (temperature) — The printhead or motor has

failed.

ZD220

6HF 6HF 6HF 6HF