User Manual
Table Of Contents
- Terms of Use
- Publication Date
- About
- Contents
- Introduction
- Printer Features
- Controls and Indicators
- Setup
- Printer Setup Overview
- Select a Location for the Printer
- Attaching Power
- Getting Ready to Print
- Loading Roll Media
- Run a SmartCal Media Calibration
- Test Printing with the Configuration Report
- Detecting a Media Out Condition
- Connecting your Printer to a Computer
- Wi-Fi and Bluetooth Classic Wireless Connectivity Option
- Setup for Windows® OS
- Print Operations
- Maintenance
- Troubleshooting
- Interface Connector Wiring
- Dimensions
- Media
- ZPL Configuration
Troubleshooting
95
Printer Network (and Bluetooth) Configuration Report
ZD-Series printers with Wired or Wireless connectivity options installed will print an additional printer
configuration report. This information needed to establish and trouble shoot Ethernet (LAN and WLAN),
and Bluetooth 4.1 network printing. The following printout is printed with the ZPL
~WL command.
iOS Bluetooth Support
• iOS devices with factory wireless connectivity options installed in your printer are noted as
‘supported’ on the bottom of the Bluetooth Configuration report.
iOS Support Setting