User Manual
Table Of Contents
- Terms of Use
- Publication Date
- About
- Contents
- Introduction
- Printer Features
- Controls and Indicators
- Setup
- Printer Setup Overview
- Select a Location for the Printer
- Attaching Power
- Getting Ready to Print
- Loading Roll Media
- Run a SmartCal Media Calibration
- Test Printing with the Configuration Report
- Detecting a Media Out Condition
- Connecting your Printer to a Computer
- Wi-Fi and Bluetooth Classic Wireless Connectivity Option
- Setup for Windows® OS
- Print Operations
- Maintenance
- Troubleshooting
- Interface Connector Wiring
- Dimensions
- Media
- ZPL Configuration
Maintenance
79
Sensor Cleaning
Dust can accumulate on the media sensors. Use a can of compressed air. Do not use an air compressor to
remove dust. Compressors add moisture, fine grit, and lubricant which can contaminate your printer.
1. Clean the Movable Sensor’s window. Gently brush away dust or use a can of compressed air; if
necessary, use a dry swab to brush away dust. If adhesives or other contaminants remain, use an
alcohol moistened swab to break it up.
2. Use a dry swab to remove any residue that may be left from the first cleaning.
3. Repeat steps 1 and 2 as required until all residue and streaks are removed from the sensor.
.
Movable Sensor
(Black Mark and Lower
Web/Gap)