User Manual
Table Of Contents
- Terms of Use
- Publication Date
- About
- Contents
- Introduction
- Printer Features
- Controls and Indicators
- Setup
- Printer Setup Overview
- Select a Location for the Printer
- Attaching Power
- Getting Ready to Print
- Loading Roll Media
- Run a SmartCal Media Calibration
- Test Printing with the Configuration Report
- Detecting a Media Out Condition
- Connecting your Printer to a Computer
- Wi-Fi and Bluetooth Classic Wireless Connectivity Option
- Setup for Windows® OS
- Print Operations
- Maintenance
- Troubleshooting
- Interface Connector Wiring
- Dimensions
- Media
- ZPL Configuration
Maintenance
74
Cutter Option
Interval: Not an operator serviceable component. Do Not Clean inside the cutter opening or blade
mechanism. You may use the Exterior cleaning to clean the cutter bezel (housing).
Method: Call a service technician.
Procedure: Not applicable.
Cut Warning • There are no operator serviceable parts in the cutter unit. Never remove the cutter cover (bezel). Never
attempt to insert objects or fingers in to the cutter mechanism.
Important • The blade has a special coating to resist adhesives and wear. Cleaning it may ruin the blade.
Important • Using un-approved tools, cotton swabs, solvents (including alcohol), etc.; all may damage or shorten the
cutter’s usable life or cause the cutter to bind.