User Manual
Table Of Contents
- Terms of Use
- Publication Date
- About
- Contents
- Introduction
- Printer Features
- Controls and Indicators
- Setup
- Printer Setup Overview
- Select a Location for the Printer
- Attaching Power
- Getting Ready to Print
- Loading Roll Media
- Run a SmartCal Media Calibration
- Test Printing with the Configuration Report
- Detecting a Media Out Condition
- Connecting your Printer to a Computer
- Wi-Fi and Bluetooth Classic Wireless Connectivity Option
- Setup for Windows® OS
- Print Operations
- Maintenance
- Troubleshooting
- Interface Connector Wiring
- Dimensions
- Media
- ZPL Configuration
38
Setup for Windows
®
OS
The section helps you setup communications between your printer and the Windows operating system
environment.
Windows to Printer Communication Setup (Overview)
For supported Windows Operating systems (most common) with a Local (wired) connection:
1. Download the Zebra Setup Utilities from the Zebra web site.
• ZD200 Series Direct Thermal Printer — www.zebra.com/zd200d-info
2. Run’ the Zebra Setup Utilities from your Download directory.
3. Click on ‘Install New Printer’ and run the install wizard.
4. Select ‘Install Printer’.and select your printer’s model number from the list of ZDesigner printers.
5. Select the USB port and connect to the PC. Use the USB interfaces to assist Wizard guided
installation of networked or Bluetooth Classic (4.0).
6. Turn the printer ON and configure printer communications for your interface type.
7. Use the Windows driver to print a ‘Test Print’ to verify operation with Windows.