User Manual
Table Of Contents
- Terms of Use
- Publication Date
- About
- Contents
- Introduction
- Printer Features
- Controls and Indicators
- Setup
- Printer Setup Overview
- Select a Location for the Printer
- Attaching Power
- Getting Ready to Print
- Loading Roll Media
- Run a SmartCal Media Calibration
- Test Printing with the Configuration Report
- Detecting a Media Out Condition
- Connecting your Printer to a Computer
- Wi-Fi and Bluetooth Classic Wireless Connectivity Option
- Setup for Windows® OS
- Print Operations
- Maintenance
- Troubleshooting
- Interface Connector Wiring
- Dimensions
- Media
- ZPL Configuration
Media
109
Cutter
The printer supports a field installed media cutter option for full width cutting of label liner, tag or receipt
media.
• A medium duty cutter for cutting label liner and light tag media (LINER/TAG). Do not cut through
labels, adhesive or embedded circuitry.
• Paper Thickness:
• Min. 0.06 mm (0.0024 inches)
• Max. 0.1905 mm (0.0075 inches)
• Cut Width:
• Min.15 mm (0.585 inches)
• Thermal Transfer Printers Max. 12mm (4.41 inches)
• Direct Thermal Printers Max. 108mm (4.25 inches)
• Minimum distance between cuts (label length): 25.4 mm (1 inch). Cutting shorter media lengths
between the cuts may cause the cutter to jam or error.
• By design, the cutter is self cleaning and does not require preventive maintenance of the internal
cutter mechanism.