User Manual
Table Of Contents
- Terms of Use
- Publication Date
- About
- Contents
- Introduction
- Printer Features
- Controls and Indicators
- Setup
- Printer Setup Overview
- Select a Location for the Printer
- Attaching Power
- Getting Ready to Print
- Loading Roll Media
- Run a SmartCal Media Calibration
- Test Printing with the Configuration Report
- Detecting a Media Out Condition
- Connecting your Printer to a Computer
- Wi-Fi and Bluetooth Classic Wireless Connectivity Option
- Setup for Windows® OS
- Print Operations
- Maintenance
- Troubleshooting
- Interface Connector Wiring
- Dimensions
- Media
- ZPL Configuration
Maintenance
80
Platen Cleaning and Replacement
The platen (drive roller) normally does not require cleaning. Normally, paper and liner dust can accumulate
without affecting print operations.
Clean the platen (and media path) whenever the printer has significantly poorer performance, print quality
or media handling. The platen is the print surface and drive roller for your media. If sticking or jamming
continues even after cleaning, you must replace the platen.
Important • Contaminants on the platen roller can damage the printhead or cause the media to slip or stick when
printing. Adhesive, dirt, general dust, oils and other contaminants should be cleaned immediately off the platen.