User guide

38
The display is too dim.
The display brightness might be set too low. Use the Tablet Center to brighten the display.
1. Open the Tablet Center.
2. Tap Power.
3. Tap Advanced.
4. Move the brightness slider to the desired level.
The display is unreadable or distorted.
The screen resolution and color quality might not be set correctly. Use Windows Display Properties to
reset the display settings.
1. Open the Control Panel by pressing and holding (right-clicking) the Windows Start button and
selecting Control Panel from the pop-up list.
2. Tap Display.
3. Tap Adjust resolution under Display.
4. Change the resolution until the display appears normal.
5. Click OK.
The display driver might have been removed or became corrupted.
Use the Windows Device Manager to reinstall the driver.
1. Swipe from the right side of the screen and tap Search.
2. In the search field, type driver.
3. Select Update device drivers from the search results.
4. In the Device Manager window, expand Display adapters.
5. Select the device.
6. Select Action > Update Driver Software.
7. Follow the on-screen instructions.
Touch or Pen Issues
The Tablet PC doesn’t respond to the pen I am using.
 Use only the XSLATE R12-Series pen with the tablet or the Rugged Digitizer pen on the
Accessories site. The Tablet PC might not respond to other digitizer pens.
When I add an external display, touch input doesn’t appear on the display.
Configuring touch settings on the display.
1. Open the Tablet Center and highlight Tablet on the left pane.
2. Tap Tablet PC Settings.
3. Tap the Display tab.
4. Tap Setup next to Configure your pen and touch displays.