User guide

Setting Up the Fingerprint Reader

1. Swipe in from the right side of the screen and tap Search.

2. Type sign in the search field and then choose Sign-in options from the search results.

3. Tap Add in the Fingerprint section of the Account settings screen and follow the instructions.

Next time you log in, you can use your PIN or use your finger on the reader.

Fingerprint Reader Tips

 Be consistent. Hold your finger and scan at the same angle each time.

 The scanner is bidirectional. You can move your finger from right to left or left to right.

 Wait for prompt before you swipe.

 Swiping too quickly or too slowly can make a capture unsuccessful.

 When scanning, press hard enough to fully contact the sensor.

 Rub your fingers together to stimulate the natural skin oils so your fingerprint is easier to

detect.

Using the SlateMate Module (Optional)

The XSLATE R12-Series SlateMate® option is factory-installed module consisting of a barcode scanner

(BCS), high-frequency RFID ready (HF RFID), and a serial port. Two configurations are available.

 3-in-1 module (BCS, HF RFID Reader, and Serial Port)

 2-in-1 module (HF RFID Reader, and Serial Port)

XSLATE R12

SlateMate