Quick Start Guide

WT6300 Wearable Computer Quick Start Guide
9
NOTE: Ensure that you follow the guidelines for battery safety described in the device Product Reference
Guide.
1. If you are charging a device with a standard battery, insert either end of the device into the device
charging slot. If you are charging a device with an extended battery, insert the end of the device into the
device charging slot as shown in Figure 11.
Figure 11 Extended Battery in Charging Slot
2. Ensure the device is seated properly.
When using the USB Charge cable, the Notification/Charge LED lights amber while charging, then turns
solid green when fully charged.
When using a cradle, the cradle Charging LED lights amber while charging, then turns solid green when
fully charged.
The standard battery fully charges in approximately four hours at room temperature. The extended battery
fully charges in approximately five hours and 30 minutes at room temperature.
Charging the Spare Battery
1. Insert a spare battery into the spare battery slot.
2. Ensure the battery is seated properly.
The Spare Battery Charging LED blinks indicating charging. See Table 2 for charging indicators. The
standard battery fully charges in approximately four hours at room temperature. The extended battery fully
charges in approximately five hours and 30 minutes at room temperature.
Table 2 Charging LED Indicators
State Indication
Off The battery is not charging. The battery is not inserted correctly in the cradle or
connected to a power source. Cradle is not powered.
Solid Amber Battery is charging.
MN-004015-01EN_wt6300-qsg-en.fm Page 9 Monday, September 14, 2020 5:29 PM