WT6300 Wearable Computer Quick Start Guide MN-004015-01EN
WT6300 Wearable Computer Quick Start Guide Copyright ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. Google, Android, Google Play and other marks are trademarks of Google LLC. All other trademarks are the property of their respective owners. ©2020 Zebra Technologies Corporation and/or its affiliates. All rights reserved. COPYRIGHTS & TRADEMARKS: For complete copyright and trademark information, go to www.zebra.com/copyright.
WT6300 Wearable Computer Quick Start Guide Device Features Figure 1 Front View 1 15 14 2 13 3 12 4 11 10 5 9 6 8 7 Number Item Function 1 Speaker Provides audio output for video and music playback. 2 Battery¹ Provides power to the device. 3 Display Displays all information needed to operate the device. 4 Recent button Displays recently open applications. 5 Right interface connector Provides USB host and client communication, audio and device charging via cables and accessories.
WT6300 Wearable Computer Quick Start Guide Figure 2 Rear View 16 17 Number Item Function 16 Cleat Provides alignment and secures the device to the wrist and hip mounts. 17 Left interface connector Provides USB host and client communication, audio and device charging via cables and accessories.
WT6300 Wearable Computer Quick Start Guide Installing the Battery To install the battery: 1. Insert the end of the battery into the battery well. Figure 3 Standard Battery Installation Figure 4 Extended Battery Installation 2. Press the battery down until it snaps into place.
WT6300 Wearable Computer Quick Start Guide Replacing the Battery To remove the battery: 1. Press the Power button to place the device in suspend mode. 2. Using finger tip, press the battery release latch toward the end of the battery. Figure 5 Pull Release Latch Back on Standard Battery Figure 6 Pull Release Latch Back on Extended Battery 3. Lift the battery out of the battery well.
WT6300 Wearable Computer Quick Start Guide Figure 8 Extended Battery Removal 4. Insert the end of the battery into the battery well. Figure 9 Figure 10 Standard Battery Installation Extended Battery Installation 5. Press the battery down until it snaps into place.
WT6300 Wearable Computer Quick Start Guide Charging the Device Use one of the following accessories to charge the device and/or spare battery.
WT6300 Wearable Computer Quick Start Guide NOTE: Ensure that you follow the guidelines for battery safety described in the device Product Reference Guide. 1. If you are charging a device with a standard battery, insert either end of the device into the device charging slot. If you are charging a device with an extended battery, insert the end of the device into the device charging slot as shown in Figure 11. Figure 11 Extended Battery in Charging Slot 2. Ensure the device is seated properly.
WT6300 Wearable Computer Quick Start Guide Table 2 Charging LED Indicators (Continued) State Indication Solid Green Battery charging is complete. Fast Blinking Red (2 blinks/second) Charging error, for example: - Temperature is too low or too high. - Charging has gone on too long without completion (typically eight hours). Solid Red Unhealthy battery is charging or fully charged. Charging Temperature Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F).
WT6300 Wearable Computer Quick Start Guide 1-Slot USB Charging Cradle 1 2 3 5 4 Number Item 1 Device charging slot 2 Spare battery charging slot 3 Power LED 4 Spare battery charging LED 5 Device charging LED 11
WT6300 Wearable Computer Quick Start Guide 2-Slot Device/RS6000 Charging Cradle 1 5 2 3 4 Number Item 1 Device charging slot 2 Device charging LED 3 Power LED 4 RS6000 charging LED 5 RS6000 charging slot 12
WT6300 Wearable Computer Quick Start Guide 5-Slot Charge Only Cradle 1 2 5 3 4 Number Item 1 Device charging slot 2 Spare battery charging slot 3 Power LED 4 Spare battery charging LED 5 Device charging LED 13
WT6300 Wearable Computer Quick Start Guide 10-Slot Device/RS6000 Charge Only Cradle 1 5 2 4 3 Number Item 1 Device charging slot 2 Power LED 3 Device charging LED 4 RS6000 charging LED 5 RS6000 charging slot 14
WT6300 Wearable Computer Quick Start Guide 10-Slot Charge Only Cradle 1 2 3 Number Item 1 Device charging slot 2 Power LED 3 Device charging LEDs 15
WT6300 Wearable Computer Quick Start Guide 5-Slot Ethernet Cradle 1 2 3 4 6 5 Number Item 1 Device charging slot 2 Spare battery charging slot 3 1000 LED 4 100/100 LED 5 Spare battery charging LED 6 Device charging LED 16
WT6300 Wearable Computer Quick Start Guide 4-Slot Battery Charger 1 Number 1 Item Battery charging LEDs (4) 17
WT6300 Wearable Computer Quick Start Guide 20-Slot Battery Charger 1 2 Number Item 1 Battery charging LEDs (20) 2 Power LED 18
WT6300 Wearable Computer Quick Start Guide USB/Charge Cable 2 3 1 4 5 Number Item 1 USB port 2 AC line cord 3 Power supply 4 USB charge cable 5 Interface connector 19
WT6300 Wearable Computer Quick Start Guide Ergonomic Considerations To avoid or minimize risk of ergonomic injury, follow these recommendations: • Ensure that users are trained in proper mounting of the device. • Ensure that the comfort pad is secured to the holder before mounting. • Ensure that the device is not worn near the wrist joint. • Ensure that the device is mounted so that the display is oriented towards the user. • Ensure proper use and maintenance of the adjustable BOA strap.
www.zebra.
