Owner's manual

Network Events
3-11
35 WLAN max MU
count reached
This is an incorrect message. It is not really the
ACL that denied association; it is really that the
802.11 limit has been exceeded.
36 Mgt user auth
failed [radius]
Management user not authenticated on the
switch’s local user database.
Management user not authenticated on the
remote RADIUS server database.
37 Mgt user auth
rejected
[UNUSED]
38 Mgt user auth
success [radius]
Management user successfully authenticates on
the switch’s local user database.
Management user successfully authenticates on
the remote RADIUS user database.
39 Radius server
timeout
Check your Radius server
configuration on the switch.
40 KDC user [added]
41 KDC user
[changed]
42 KDC user [deleted]
43 KDC DB replaced
44 KDC propagation
failure
Host name is unknown.
45 WPA counter-
measures [active]
The switch will be “down” for a short length of
time and then come back up to re-associate MUs.
46 Primary lost
heartbeat
The Primary switch in Standby mode did not
receive monitoring heartbeats from the Standby
switch.
If this event occurs but failover does
not occur, then there is possible
congestion on the network causing
the heartbeats to be lost. Also, look
for other events prior to the lost
heartbeats that might indicate a
problem, such as Ethernet port
disconnected.
47 Standby active The Standby switch has changed its state from
Monitoring to Active.
A failover has occurred.
48 Primary internal
failure [reset]
49 Standby internal
failure [reset]
Table 3.2 Network Event Course of Action Lookup (Continued)
ID Event Description Possible Course of Action