Owner's manual

WS5000 Series Switch Troubleshooting Guide
3-2
2 Packet discard
[wrong NIC]
Discarded Packet: Wrong NIC <XX> <XX> vs
<YY> from access port ZZ.
XX = Ethernet port that received the packet
= 1 or 2
YY = Ethernet Port that the access port was
adopted from = 1 or 2
ZZ = MAC (xx:xx:xx:xx:xx:xx) address of the
Access Port
3 Packet discard
[wrong VLAN]
Discarded Packet: Wrong VLAN <XX> <XX>
vs <YY> from access port <ZZ>.
XX = VLAN that received the packet (an
integer).
YY = VLAN the access port was adopted
from (an integer).
ZZ = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
4 AP adopt failure
[general]
Adoption <XX> failed. The MAC address
has been used by an existing access port.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
radio or access port.
5 AP adopt failure
[policy disallow]
Access port policy prevented port with MAC
<XX> from being adopted.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
6 AP adopt failure
[acl disallow]
This event and message is currently not
configured. It will be configured in the next
service release.
Not applicable.
7 AP adopt failure
[limit exceeded]
Access port <XX> was not adopted because
maximum limit has been reached.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
8 AP adopt failure
[license disallow]
License denied access port <XX> adoption.
Maximum access ports allowed with
current license = <YY>.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
YY = License Level (integer).
9 AP adopt failure
[no image]
Access port with MAC <XX> can not be
adopted because no valid firmware image
file can be found.
XX = MAC (xx:xx:xx:xx:xx:xx) address of the
access port.
10 AP status [offline] Access port <XX> with MAC address <YY>
is unavailable.
XX = Name (string) of the access port.
<YY> = MAC (xx:xx:xx:xx:xx:xx) address of
the access port.
Taking access port <XX> with MAC address
<YY> offline.
XX = Name (string) of the access port.
<YY> = MAC (xx:xx:xx:xx:xx:xx) address of
the access port.
11 AP status [alert] Access port <XX> with MAC address <YY>
is in Alert status due to country not set.
XX = Access port name (string).
YY = Access port MAC (xx:xx:xx:xx:xx:xx)
address.
Access port <XX> with MAC address <YY>
is in Alert status.
XX = Access port name (string)
<YY> = Access port MAC (xx:xx:xx:xx:xx:xx)
address.
Table 3.1 Network Event Message/Parameter Description Lookup (Continued)
ID Event Message Parameters