Owner's manual

Service Mode CLI Commands
2-15
Example
SM-WS5000> save configuration backupsystem
Saving running configuration in: backupsystem.cfg
Saving Wireless Network Management Configuration ...
Done.
SM-WS5000>
2.2.22 shell
The command allows the user to enter into the embedded OS Command prompt and environment.
Syntax
shell
Parameters
None.
Example
SM-WS5000>shell
2.2.23 show
Displays a list of details about the WS5000 system related to the chosen display_parameter.
Syntax
show <display_parameter>
Parameters
Example
SM-WS5000> show ?
Syntax: show <display_parameter>
show accessports Display access port details
show acl Display ACL information
show allconfig Display all config details
show appolicy Display Access Port Policy
show ce Display Classifiers
show cg Display Classification Group
show channelinfo Display channel no and country code details
show chassis Display Chassis details
show configaccess Display configured system access restrictions
show cpuUsage Displays CPU Usage
show debuglog Display the current dynamic debug log
show ethernet Display Ethernet Port details
show etherpolicy Display EtherPolicy details
show events Show Syslog event details
show ftp Display FTP status
show host Display the Hosts defined in the system
display_parameter The keyword used with the show command displays details related to the
display_parameter. See the Example, below, for a list of all available parameters and
brief descriptions. For more details on displayed information,refer to the WS5000 Series
Switch System Reference Guide.
Alternatively, enter the command followed by a ? symbol. For example:
show accessports ?