Owner's manual

WS5000 Series Switch Troubleshooting Guide
2-10
2.2.12 directory
Lists the image and configuration files that are stored on the WS5000. As a shortcut, “dir” can be used instead
of “directory”.
Syntax
directory
Parameters
None.
Example
SM-WS5000> directory
Date & Time Bytes File Name
Sep 24 13:01 1418 CmdProcErrors.txt
Sep 21 09:53 0 KerberosErrorLog.txt
Sep 10 13:25 16221 WS5000Defaults_v1.4.1.0-003D.cfg
Sep 22 08:34 0 WS5000Defaults_v1.4.1.0-003D.cfg.current
Sep 17 15:23 16979643 WS5000_v1.4.1.0-003D.sys.img
Sep 10 12:49 7490 cmd_template.sym
SM-WS5000>
2.2.13 emergencymode
Enables or disables the “Emergency” Switch Policy (ESP). This is a switch policy that can activated (enabled)
at any time in case of an emergency. When ESP is deactivated (disabled), the previous switch policy is
reactivated.
Define an Emergency switch Policy prior to enabling the Emergency Wireless Switch Policy. Create two or
more switch policies. An error message displays if less than two Switch Policies are available.
Syntax
emergencyMode <enable_flag>
Parameters
Example
SM-WS5000> emergencyMode enable
2.2.14 execute
Executes the specified file. The command is used with specified optimization (patch file) files provided from
Symbol Technologies when a service upgrade is needed on the WS5000 Series Switch.
Syntax
execute
Parameters
None.
Example
SM-WS5000> execute
enable_flag Indicates whether to enable or disable the ESP. Possible values are:
• enable
• disable