Owner's manual

WS5000 Series Switch Troubleshooting Guide
2-8
IP address of the TFTP server : 10.1.1.1
Copying 'backup.sys.img' from tftp://10.1.1.1 to Switch...
or
SM-WS5000> ftp://100.10.10.1/ftpimages/DefaultConfig.cfg system
Copying 'DefaultConfig.cfg' from ftp://100.10.10.1/ftpimages/ to Switch...
2.2.9 debug
Allows enabling or disabling logging of debug messages in the debug log file. User must execute the debug
command to see the log of the operating function. Entering a specific option displays the debug option that is
enabled.
Syntax
debug <option> <enable/disable>
Parameters
Example
SM-WS5000> debug sharedmem enable
Enabling SHARED MEMEORY data logging ...
Status: Success.
Debug flag value (Hex): 00000151
Enabled options are:
-------------------
Option Parameter Description Option Parameter Description
errors enable|disable Error messages events enable|disable Events info
general enable|disable General messages corba enable|disable CORBA handling
threads enable|disable Process thread info packets enable|disable Packets data
sharedmem enable|disable Shared memory data apfirmware enable|disable AP firmware info
accessport enable|disable Access Port info mu enable|disable Mobile unit data
ess enable|disable ESS handling xml enable|disable XML info
policy enable|disable Policy handling qos enable|disable QOS handling
ethernet enable|disable Ethernet data vlan enable|disable VLAN handling
stats enable|disable Statistical data database enable|disable Database info
snmp enable|disable SNMP data security enable|disable Security handling
driver enable|disable Driver messages memory enable|disable Memory use info
standby enable|disable Standby info kdc enable|disable Kerberos messages
frames enable|disable Frame info acs enable|disable ACS info
all enable|disable Select all of the options