Owner's manual

WS5000 Series Switch Troubleshooting Guide
2-6
available in the normal System Context (WS5000> prompt) are the same. One additional command, however,
is the launch command, which is also available at the Service Mode root Content (SM-WS5000> prompt).
For more details on all of these sub-contexts and available commands, refer to the WS5000 Series Switch
System Reference Guide.
Syntax
configure
Example
SM-WS5000> configure
SM-WS5000.(Cfg)> ?
Config Context.
----------------------------------------------
Commands Brief Description
----------------------------------------------
.. or end Go back to the previous context.
exit Go back to root context.
? or help To get the command information
logout or bye Close this session
accessport Configure an Access Port.
acl Configure ACL for the system.
appolicy Configure an Access Port policy.
ce Configure a Classifier.
cg Configure a Classification Group.
chassis Configure Chassis settings.
clear Clears the screen
copy Copy files between the Switch and TFTP/FTP server.
date Set or display system time and/or date
delete Delete an image files from the memory
description Set description text.
directory Display the available image files in memory
emergencymode Enable or disable Emergency Mode
ethernet Configure Ethernet Port.
etherpolicy Configure an EtherPolicy.
events Configure Event properties.
ftp Configure system FTP settings.
host Configure Host properties.
install Install primary/standby or Kerberos config.
kdc Configure KDC server.
launch Launches the specified program
name Set or change the name.
np Configure a Network Policy.
ping Ping a network host/IP address
po Configure a Policy Object.
radius Configure RADIUS setting.
reset Reset Switch
restore Restore system image or configuration.
runacs Run ACS on all adopted Access Ports
save Save the running system configuration to a file.
securitypolicy Configure Security Policy for the system.
set Set Switch attributes
show Display context specific attributes
shutdown Shutdown the Switch
snmp Configure SNMP parameters.
ssh Configure SSH settings.
ssl Configure SSL settings.
standby Configure system Standby settings.