Owner's manual

Service Mode CLI Commands
2-5
Syntax
capture <sysstat>
Parameters
Example
SM-WS5000> capture sysstat
Capturing current system status....
Starting the SSM capture ...
Finished the SSM capture ...
SM-WS5000>
2.2.5 check
This command checks the integrity of the system image installed. It calculates the MD5 check sum of all the files
and verifies that it matches with the records supplied with system image.
Syntax
check install
Parameters
Example
SM-WS5000> check install
Total failures = 0
SM-WS5000>
2.2.6 clear
Clears the screen contents and returns to the service mode prompt.
Syntax
clear
Parameters
None.
Example
SM-WS5000> clear
SM-WS5000>
2.2.7 configure
The command changes the Service Mode CLI to the Service Mode “Configuration” context, allowing the
administrator to configure system attributes within the Service Mode. The sub-contexts and related commands
<sysstat> Saves the system status to a file.
install This is a mandatory parameter and is the only parameter available to the check
command, currently.