Owner's manual

WS5000 Series Switch Troubleshooting Guide
2-4
directory Display the available image files in memory.
emergencymode Enable or disable Emergency Mode.
execute CLI Service Mode command file execution.
install Install primary/standby or Kerberos config.
launch Launches the specified program.
name Set or change the name.
password Change the CLI Service Mode password.
ping Ping a network host/IP address.
restore Restore system image or configuration.
save Save the running system configuration to a file.
shell Enter into the embedded O.S. command prompt.
show Display context specific attributes.
watchdogtimer Enable/disable watch dog timer.
SM-WS5000>
2.2.2 logout or bye
Exits service mode and logs the user out of the switch. Identical to the command "bye".
Syntax
bye
Parameters
None.
Example
SM-WS5000> bye
Logging out...
user name:
2.2.3 exit
Exits the CLI Service Mode and returns to the switch command prompt (normal CLI).
Syntax
exit
Parameters
None.
Example
SM-WS5000> exit
Disabling CLI Service Mode commands...... done.
WS5000>
2.2.4 capture
This command saves the current system status of various tables, files and processes of the switch to a file, for
use by Symbol engineers during problem resolution. The file name, ssm_report, appears in the WS5000/
scripts/service/ directory. Any previous ssm_report file gets renamed to ssm_report.prev.
After capturing the system status, it can be displayed by using the show sysstat command.