Owner's manual

Service Mode CLI Commands
2-3
2.2.1 ? or help
Displays a list of available commands. Identical to "help" command.
Syntax
?
Parameters
None.
Example
SM-WS5000> help
System Context.
----------------------------------------------
Commands Brief Description
----------------------------------------------
? or help To get the command information.
logout or bye Close this session.
exit Exit from the Service CLI mode.
capture Capture the current system status to a file.
check Check system integrity.
clear Clears the screen.
configure Configure system attributes.
copy Copy files between the Switch and TFTP/FTP server.
debug Enable/disable debug information to the log file.
delete Delete an image files from the memory.
description Set description text.
delete Delete an image files from the memory page 2-9
description Set description text page 2-9
directory Display the available image files in memory page 2-10
emergencymode Enable or disable Emergency Mode page 2-10
execute CLI Service Mode command file execution page 2-10
install Install primary/standby or Kerberos config page 2-11
launch Launches the specified program page 2-11
name Set or change the name. page 2-12
password Change the CLI Service Mode password page 2-12
ping Ping a network host/IP address page 2-12
restore Restore system image or configuration. page 2-14
save Save the running system configuration to a file page 2-14
shell Enter into the embedded OS command prompt page 2-15
show Display context specific attributes page 2-15
watchdog Enable/disable watch dog page 2-16
Table 2.1 Service Mode Command Review (Continued)
Command Brief Description Ref.