Installasjonsveiledning

3
Installation
This document outlines the various methods to install Zebra Workstation Connect onto a mobile device.
The sections below describe installing the application manually, via the StageNow application, or via XML.
After installing the Android 11 OS specific to the mobile device being used, the device uses Mirror Mode as
the default when docked in a Zebra Workstation Cradle and connected to a HDMI monitor. If Mirror Mode
is the required view mode, no further actions are required.
Zebra Workstation Connect Installation
Users can install the Zebra Workstation Connect on the mobile device by downloading via StageNow and
following the instructions in Installing via StageNow, by utilizing XML for EMM and following the procedure
outlined in
Installing via XML or manually by following the steps outlined in Manual Installation,
Installing via StageNow
Prior to the steps below, install StageNow v.5.2.0.1032 or higher and create a StageNow profile.
1. Configure an applicable network where the Zebra Workstation Connect APK can be downloaded over
Wi-Fi.
2. Download the Zebra Workstation Connect APK to a suitable location on the mobile device using
FileMgr. Refer to
techdocs.zebra.com/stagenow/2-2/csp/file/ for more information about the usage of
FileMgr.
3. Install the Zebra Workstation Connect APK using AppMgr. Refer to
techdocs.zebra.com/stagenow/3-1/csp/app/ for information about the usage of AppMgr including
installing an APK on the device.
4. Grant Zebra Workstation Connect APK permission to Display over other apps using AccessMgr. For
more information, refer to
techdocs.zebra.com/mx/accessmgr/. See the image below for more
information about the usage of AccessMgr, including granting permissions to an application.
5. Provide the application signature of the Workstation Connect APK and attach it to the StageNow profile.
For more information on generating a signature, see
developer.zebra.com/blog/generating-package-signature-use-mx
workstationcradle-dev-guide.book Page 3