User guide

Wireless Status and Settings

View or Change Wireless Parameters on the LCD

14143L-005 Rev. A Wireless User Guide 4/29/08

RESET NETWORK

1,3

Reset the Wired or Wireless Network

Use this parameter to reinitialize the wireless radio card and the print server

(wired or wireless) when the wireless print server is running. This

parameter also causes any wireless radio card in the printer to reassociate to

the wireless network. (Same function as ZPL command ~WR on page 112.)

1 Appears after the printer recognizes the existence of a ZebraNet print server (wired or wireless). All zeroes

(000.000.000.000) display until the printer obtains an IP address or defaults to address 192.168.254.254.

2 Appears only when the ZebraNet Wireless Print Server is installed.

3 If a wireless password is set, you must enter the wireless password (not the printer password) to access this parameter.

Table 11 • Wireless Parameters for V53.15.x and R53.16.x Firmware

(ZM400, ZM600, RZ400, and RZ600 Printers) (Continued)

Parameter

Function