User guide

51
Wireless Status and Settings
View or Change Wireless Parameters on the LCD
4/29/08 Wireless User Guide 14143L-005 Rev. A
IP ADDRESS
2
View or Change the Printer’s IP Address
This parameter can be modified only when
PERMANENT is selected for
OBTAIN IP ADDRESS.
Selections: 0 to 255 for each field
Default Value: 0.0.0.0
Note • Leading zeroes are not shown in the address.
SUBNET MASK
2
View or Change the Subnet
This parameter can be modified only when
PERMANENT is selected for
OBTAIN IP ADDRESS.
Selections: 0 to 255 for each field
Default Value: 255.255.255.0
Note • Leading zeroes are not shown in the address.
DEFAULT GATEWAY
2
View or Change the Gateway
This parameter can be modified only when
PERMANENT is selected for
OBTAIN IP ADDRESS.
Selections: 0 to 255 for each field
Default Value: 0.0.0.0
Note • Leading zeroes are not shown in the address.
MAC ADDRESS
2,3
View the Wireless Radio Card’s MAC Address
Each wireless radio card has a permanent and unique Media Access
Control (MAC) address assigned to it. This parameter shows the MAC
address for the current wireless radio card.
Default Value: 000000000000
ESSID
1,2,3
View the ESSID Value
The Extended Service Set Identification (ESSID) is an identifier for your
wireless network. This parameter shows the ESSID for the current wireless
configuration.
Default Value: 125
WLAN SECURITY
1,3
View the WLAN Security Type
This parameter displays the current security type. To change the value
shown, use ^WX on page 115 or wlan.security on page 192.
Table 11 • Wireless Parameters for V53.15.x and R53.16.x Firmware
(ZM400, ZM600, RZ400, and RZ600 Printers) (Continued)
Parameter
Function