User guide

Wireless Status and Settings

Print Network Configuration Information

14143L-005 Rev. A Wireless User Guide 4/29/08

Print Network Configuration Information

Most printers and print engines print the print server settings on a network configuration label.

The HC100 prints the print server settings on the printer configuration wristband.

Network Configuration Label

A network configuration label lists the settings for the print servers installed in your printer. If

a particular type of print server is not installed, the IP information for that print server appears

as all zeroes (000.000.000.000). The active print server is indicated by an asterisk (see

Determining the Active Print Server on page 25 for more information).

To print a network configuration label, complete these steps:

1. From the control panel, enter Setup mode.

2. Scroll to LIST NETWORK (level 3 parameter PRINT OUT NETWORK on the S4M).

3. Confirm printing.

A network configuration label prints (Figure 6).

Figure 6 • Network Configuration Label

Note • Refer to the user guide for your printer for specific instructions on how to use the